中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 42847.3-2023 储能系统用可逆模式燃料电池模块 第3部分:电能储存系统性能测试方法(中英文版) Reversible mode fuel cell modules for energy storage systems Part 3: Electrical energy storage system performance test methods |
|||
GB/T 42847.2-2023 储能系统用可逆模式燃料电池模块 第2部分:可逆模式质子交换膜单池与电堆性能测试方法(中英文版) Reversible mode fuel cell module for energy storage systems Part 2: Performance testing method of reversible mode proton exchange membrane cell and stack |
|||
GB/T 42575-2023 北斗双模型OEM板性能要求及测试方法(中英文版) Performance requirements and test methods for Beidou dual-model OEM boards |
|||
GB/T 42603.2-2023 熔模铸造中温模料 第2部分:使用性能试验方法(中英文版) Moderate temperature molding materials for investment casting - Part 2: Test methods for serviceability |
|||
GB/T 42603.1-2023 熔模铸造中温模料 第1部分:物理性能试验方法(中英文版) Moderate temperature molding materials for investment casting - Part 1: Test methods for physical properties |
|||
GB/T 41738-2022 纤维金属层板I型层间断裂韧性(GIC)试验方法(中英文版) Test method for mode I interlaminar fracture toughness (GIC) of fiber metal laminates |
|||
GB/T 41890.1-2022 船舶与海上技术 船舶设计过程中螺旋桨空化噪声模型试验方法 第1部分:声源级评估(中英文版) Ships and marine technology—Model test methods for propeller cavitation noise during ship design—Part 1: Sound source level assessment |
|||
HB 8651-2022 旋翼飞行器水面漂浮特性模型试验方法(中英文版) Model test method for water surface flotation characteristics of rotorcraft |
|||
YD/T 3932-2021 LTE/CDMA/TD-SCDMA/WCDMA/GSM(GPRS)多模双卡多待终端协议一致性测试方法(中英文版) LTE/CDMA/TD-SCDMA/WCDMA/GSM(GPRS) multi-mode dual-card multi-standby terminal protocol conformance test method |
|||
GB/T 15972.45-2021 光纤试验方法规范 第45部分:传输特性的测量方法和试验程序 模场直径(中英文版) Specifications for optical fibre test methods—Part 45:Measurement methods and test procedures for transmission characteristics—Mode field diameter |
|||
GB/T 15972.49-2021 光纤试验方法规范 第49部分:传输特性的测量方法和试验程序 微分模时延(中英文版) Specifications for optical fibre test methods—Part 49: Measurement methods and test procedures for transmission characteristics—Differential mode delay |
|||
GB/T 37977.32-2019 静电学 第3-2部分:静电效应的模拟方法 机器模型(MM)的静电放电试验波形(中英文版) Electrostatics—Part 3-2:Methods for simulation of electrostatic effects—Machine model(MM)electrostatic discharge test waveform |
|||
GB/T 36456.3-2018 面向工程领域的共享信息模型 第3部分:测试方法(中英文版) Engineering domain oriented shared information model - Part 3:Testing methodology |
|||
GB/Z 6113.401-2018 无线电骚扰和抗扰度测量设备和测量方法规范 第4-1部分:不确定度、统计学和限值建模 标准化EMC试验的不确定度(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods—Part 4-1:Uncertainties,statistics and limit modelling—Uncertainties in standardized EMC tests |
|||
GB/T 36580-2018 船舶螺旋桨空泡脉动压力模型试验方法(中英文版) Test method of model propeller for cavitation observation and pressure fluctuation measurement |
|||
GB/T 15972.48-2016 光纤试验方法规范 第48部分:传输特性和光学特性的测量方法和试验程序 偏振模色散(中英文版) Specifications for optical fibre test methods—Part 48: Measurement methods and test procedures for transmission and optical characteristics—Polarization mode dispersion |
|||
YD/T 1065.2-2015 单模光纤偏振模色散的试验方法 第2部分:链路偏振模色散系数(pmdq)的统计计算方法(中英文版) (PMD test method for single-mode fiber Part 2: link polarization mode dispersion coefficient (PMDQ) the calculation method) |
|||
YD/T 1065.1-2014 单模光纤偏振模色散的试验方法 第1部分:测量方法(中英文版) (PMD test methods for single-mode fiber Part 1: Methods of measurement) |
|||
YD/T 2688-2013 LTE/CDMA/WCDMA/GSM(GPRS)多模终端设备(单卡槽)技术要求及测试方法(中英文版) Technical requirements and test method for multimode user equipment(Single card slot) of LTE/CDMA/WCDM/GSM(GPRS) |
|||
YD/T 2684-2013 LTE/TD-SCDMA/WCDMA/GSM(GPRS)多模单待终端设备测试方法(中英文版) Test method for multimode single standby user equipment of LTE/TD-SCDMA/WCDMA/GSM(GPRS) |
找到:52條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 |